WHEN  THE VALVES FAIL IT MAKES A MESS OF THE COMBUSTION CHAMBER

THIS WAS A SET OF HEADS ON A SUPERCHARGED APPLICATION THAT HAD SUCH A FAILURE

VALVE SEAT REMOVAL AND REPLACEMENT COMBUSTION CHAMBER WELDING AND CONTURING ARE NESSASARY TO SAVE THIS SET OF HEADS

CYLINDER MATING SURFACE AND DOME ANGEL SURFACING REPLACEING ALL THE VALVES AND VALVE GUIDES TESTING AND SHIMING ALL VALVE SPRINGS FOR MAXIMUM CAM LIFT WITH A 3 ANGEL NEWEN VALVE JOB ARE JUST WHAT THE DOCTOR ORDERD TO REVIVE THIS MACHINE

Cylinder heads are where you need to pay attention this is what controls your machines drive ability, wide power curves are a must for performance. sewer pipe ports flow big numbers but don't work at the track we don't race dyno's or flow benches these are tools to work with, put in the right hands will show the results you are looking for .

This is the cure for leaking main bolts.  Old magnesium cases distort over many heat cycles and sealing surface elongates on the case halves.  Spot facing counter boring for larger o-ring cures all surface irregularities and oil leaks.  Contact us for more information,

When instauling your motor keeping it on the floor jack can be a fist fight when doing it by your self

this mount ballances the motor and transmishion as one unit so a singel tec can install the motor by them self

911 CYLINDER HEADS COMPLETE

12 NEW VALVE GUIDES AND COMPLETE VALVE JOB AND ASSEMBLY

HEAD GASKET SURFACED .010 OFF STANDARD DIMENSHION

46 INTAKE AND 40 EXHAUST VALVE SIZES WITH A 36.5 INTAKE PORT

FULL CONTURING AND POLISHING FLOW NUMBERS AVAIBLE UPON REQUEST

HEADS ARE LOCATED IN WEST PALM BEACH 2500.00 

A GOD SET OF CORE HEADS DEDUCT 500.00

CALL MIKE 

maximum flow bench numbers are not the key to horse power

the key to good power curve is in velosity in air flow

The anser is in the air speed

remember sewer pipes flow big numbers

and a flow bench is only as good as the opperator